What do homeowners see quoted for epoxy floors?
Homeowner cost guides commonly show about $3 to $12 per square foot for professionally installed epoxy, materials and labor included. This Old House and Bob Vila both give that range. Bob Vila puts a typical epoxy garage floor between about $1,595 and $3,337, with a national average around $2,441.
Some other numbers from those guides:
| Item | Range homeowners see | Source |
|---|---|---|
| Professional epoxy floor, installed | $3 to $12 per sq ft | This Old House, Bob Vila |
| Typical epoxy garage floor total | $1,595 to $3,337 | Bob Vila |
| One-car garage, about 240 sq ft | $720 to $2,900 | Bob Vila |
| Three to four car garage | $1,700 to $9,500 | Bob Vila |
| Metallic epoxy | $5 to $12 per sq ft | This Old House, Bob Vila |
| Labor | $4 to $7 per sq ft, up to about 65% of the price | Bob Vila |
| Patching chips and small cracks | $25 to $250 | This Old House, Bob Vila |
| Resurfacing | $3 to $5 per sq ft | This Old House |
These are what homeowners read before they call you. They vary a lot by region, system and prep. Use them as a sanity check, not as your price.
How do you build a price from your own costs?
Work from the bottom up, so you know every job makes money.
1. Measure the floor
Measure every space and add it up. Note steps, drains, columns and stem walls. Measure in person. Phone guesses are how jobs lose money.
2. Materials
Use your supplier's coverage rates for each coat in your system: primer or base, flake, topcoat. Add crack filler, patch material and moisture mitigation if needed. Add a little for waste. Divide by square footage to get material cost per square foot for that system.
3. Labor
Count real hours for the whole job, not just coating time:
- Moving stuff out of the way and taping off
- Grinding, and removing old coatings if there are any
- Crack and spall repair
- Each coat, plus the flake broadcast, scrape and vacuum
- Cleanup and walkthrough
Multiply hours by your loaded labor rate: what each hour costs you including payroll taxes and workers comp, not just the wage.
4. Prep extras
Price these separately so the homeowner sees why:
- Old paint or coating removal
- Crack repair beyond the basics
- Moisture mitigation for damp slabs
- Stem walls
5. Job costs
Diamond tooling wear, consumables like rollers and squeegees, disposal, fuel and drive time.
6. Overhead
Your share of the stuff that keeps the business running: insurance, truck and trailer, equipment payments, phone, software, marketing and leads, your own time on quotes. Add it up for the year, divide by the jobs you do, and put that share on every job.
7. Profit
Profit is not your wage. It's what's left for the business after everything above is paid. Pick a target and stick to it.
8. Minimum job charge
Small jobs cost almost as much to mobilize as big ones. Set a minimum and don't drop below it.
Got the pricing down? Get more floors.
Every lead goes to you and nobody else. Guaranteed.
What does a worked example look like?
Here's an example for a 2-car garage of about 450 square feet with a full flake system. These are example numbers to show the method, not a price to copy. Your costs will be different.
| Line | Example |
|---|---|
| Floor size | 450 sq ft |
| Materials at $1.80 per sq ft | $810 |
| Labor: 2 people, 8 hours, $35 per hour loaded | $560 |
| Job costs: diamonds, consumables, disposal | $150 |
| Direct cost | $1,520 |
| Price at $7 per sq ft | $3,150 |
| Left after direct costs | $1,630 |
From that $1,630 left over, you still pay your overhead share. If overhead runs about $450 per job, about $1,180 is profit. $7 per square foot sits inside the $3 to $12 range homeowners see, and the total lands close to Bob Vila's typical garage range.
Run your own numbers with the job profit calculator.
How do you price different systems?
Price each system from its own materials and labor. In general:
- Single coat or basic epoxy. Lowest material cost, fastest install. Easiest to undercut, hardest to make money on.
- Full broadcast flake. More material and labor, a big step up in looks and wear. Often the best seller.
- Flake with a polyaspartic topcoat. Faster cure, better in sun. Price the product cost and the fast-cure crew skill.
- Metallic. Decorative, skill-heavy and slow. Homeowner guides show about $5 to $12 per square foot. Price for the artistry and the risk.
How should you present the price?
Show three options: good, better, best. Write them down, side by side.
- Good: a solid basic system that will last
- Better: full flake with a strong topcoat
- Best: better, plus stem walls and an upgraded topcoat or extra wear layer
Most homeowners choose the middle. Nobody feels pushed, and you never have to drop your price to keep the deal alive.
Say the prep out loud: "The grind is why this floor won't peel." It explains why you're not the cheapest.
Why does the cheapest bid lose money?
Because the only way to be cheapest is to cut something. Usually it's grinding, crack repair or coat thickness. Those floors fail, the crew eats the callback or the bad review, and the homeowner tells the neighbors coatings don't work.
If you win on price, you'll lose on price next time too. Win on the floor, the options and the follow-up. Shared leads make price wars worse. See exclusive vs shared leads.
Questions
How much should I charge per square foot for epoxy?
Build it from your own costs first. Then check it against what homeowners see quoted, often about $3 to $12 per square foot installed. Where you land depends on your system, prep and area.
How much should I charge for a 2-car garage epoxy floor?
It depends on size, prep and system. Bob Vila's typical epoxy garage range is about $1,595 to $3,337. Measure the floor, build your cost, then add overhead and profit.
Should I charge for crack repair separately?
Yes. Itemize it so the homeowner sees what's included and why. It also stops you from eating repair costs on bad slabs.
What's a good profit margin on epoxy floors?
There's no single right number. Know your full costs, including overhead, and set a target you can hit on every job. The job profit calculator helps.
How do I stop losing jobs to cheaper bids?
See the floor, explain the prep, and show three options. And work leads that aren't also being quoted by three other crews. Our epoxy flooring leads go to one contractor only.